Gas welding is a process that can never be carried out properly unless you have the right set of equipment with you. The major welding or other repair is done by the oxy-acetylene equipment or blow torch. There is no electricity involved in operating the torch.
However, the process needs proper gas cutting and welding accessories to achieve the best results possible. Here are listed the accessories you will require to carry out the complete process.
Table of Contents
Must-Have Accessories To Get The Best Results
Keep in mind that you can have as many cutting torch supplies as you feel the need to. However, the ones listed here are some of the must-havesÂ
1. Welding Kit
If you are using the torch for welding, the first thing you need is the kit dedicated solely to this work. The kit includes welding gloves, welding cap, welding aprons, dust masks, welding earplugs, and other safety equipment that will ensure you are not harmed in any single way throughout the process.
You can even purchase a complete kit from the market as well. However, ensure that the material given to you is of high quality.
2. Welding Curtains
The welding process creates a lot of unwanted noise that may bother other people in the vicinity. Thus, you will need welding curtains to absorb all the noise. Along with this, these curtains will ensure that the temperature and the fumes released are not released directly into the air. Thanks to the material used in manufacturing, these can withstand all the harsh treatment of the process.
3. Welding Tip Cleaner
cutting torch supplies require tip cleaner to ensure that the tip of oxy-acetylene torches. Such cleaners are designed as a way to keep the material in good condition and do not damage it while cleansing.
4. Fire Extinguisher
A fire extinguisher is an essential piece of equipment that will ensure the optimum safety of the welder. The welding process includes smoke, fumes, and spark. All these can even lead to big fires that are not appropriately handled. Hence, you will require a fire extinguisher to keep the place and the place safe.
5. Chipping Hammers And Wire Brushes
A wire brush is needed to remove the rust, dirt, and grime from the metal piece you are working on. In case the metal piece has an unclean surface, the chances of crack, porosity, and lack of penetration increase significantly. It is also recommended to use chipping hammers paired with a wire brush.
